Showing 13–24 of 40 results

ME-1000 ‘’Eitan’’ magnetic polishing machine

$0.00
The ‘’Eitan’’ magnetic polishing machine is a high performance unit. It’s extremely environmental  friendly as there’s no chemical products needed! By eliminating as much chemicals as possible crucial for the environment and health and safety during handling. The cleaning and polishing becomes very simple and safe. The procedure is not abrasive so there’s no loss of weight. Great for any regular precious and semi-precious jewellery such as gold, platinum, rhodium and combination of stones. The largest  container size in the line of ‘’Eitan’’ magnetic polishing machines! The unit will perform the optimal cleaning where standard equipment fails in large volume! The high penetration of the pins will reach the spots that normally removed with chemical use. Any sector that requires precision cleaning in large volume is a must! Product design for heavy industrial use in the medical, dental implant production, aviation, military and manufacturer sector.

Application

Simply place all items in the container for 10-60 minutes depending on the item. Container is custom built and has a special coating to improve and maximise the result. Powerful motor allows to process even more items. The capacity of ME-1000 is suitable for up to 1kg of different items, more than double then the ME-600. During operation the noise level is very low and no vibration. Built in forward and backward motion is an additional added great feature. The size of the unit still allow portability.

P-2 ‘’Eitan’’ cold rhodium electroplating unit

$0.00
The First small size electroplating unit made by modern glass fibre and reinforced plastic including an integrated cover. Clean modern design and development to optimize the functionality to meet the targets. With the increased high quality of the electroplating unit ‘’Eitan’’ made it affordable and available  for all sector small or large outfits.

NO HEAT REQUIRED FOR PLATING, NO EVAPORATION, MAXIMUM USE OF RHODIUM SOLUTION!

Ideal and compact for the jewellery sector specifically targeting cold rhodium plating. Powerful and high quality platin for up to 10 pieces at the same time. Very reliable and built to last! The ‘’Eitan’’ rhodium electroplating unit  comes with a 10 volt /15 ampere/48% r.r rectifier. On the display area the analogue indicating the device for voltage and current for monitoring at all times.

Application

Very easy to use unit with the quickly removable bath sections. The front panel slides out to access the containers. Top of the unit sits nicely and by being able to remove it, can stay out of the  way during setting. Operation is fast and smooth. Unit comes with a stainless steel anode and a hanger jig for the multiple quantity plating. No heat required for plating therefore no evaporation and maximum use guaranteed for the solution. https://youtu.be/R42gNDtMGks

P-3 ‘’Eitan’’ cold rhodium electroplating unit

$0.00
The First  electroplating unit made by modern glass fibre and reinforced plastic including an integrated cover. Designed to deal with large volume production and with the flexibility of colour variation. Clean modern design and development to optimize the functionality to meet the targets. With the increased high quality of the cold electroplating unit ‘’Eitan’’ made it affordable and available  for all sector small or large outfits.

NO HEAT REQUIRED FOR PLATING, NO EVAPORATION, MAXIMUM USE OF RHODIUM SOLUTION!

Ideal for jewellery workshops for the full range of cold rhodium electro plating, more volume more options. Very reliable and built to last! The ‘’Eitan’’ cold rhodium electroplating unit  comes with a 10 volt /15 ampere/48% r.r rectifier. On the display area the analogue indicating the device for voltage and current for monitoring at all times. Ultimate electroplating  unit that will provide the full range of product finishes necessary.

Application

Very easy to use unit with the quickly removable bath sections, 3 working bath and 3 rinse bath. The front panel slides out to access the containers same as the smaller ‘’Eitan’’ unit P-2. Top of the unit has the same removable design, can stay out of the  way during setting. Operation is fast and smooth. Unit comes with a heating element, stainless steel anode, hanger jig, and titanium anode. No heat required for plating therefore no evaporation and maximum use guaranteed for the solution. Display comes with an additional timer control, thermostat and heating element control.

ES-2 ‘’Eitan’’ sand blaster

$0.00
The ES-2 ‘’Eitan’’ sand blaster is manufactured to the highest standard with an ergonomic and stable finish built to last! Very robust and heavy duty built. This unit is equipped with dichroic lamp in recessed position to highlight the air syringe inside the cabinet. Provides full visibility through the tempered inspection glass at view point. The glass is covered with a special protective film to ensure durability. ‘’Eitan’’ also integrated high quality certified filters to retain bust and humidity and added selector for sand recycling.

TOP QUALITY CARBIDE NOZZLE, FAST & EXCELLENT FINISH!

Equipped with external dial to control the level of blast and easy monitoring with the on view pressure gauge. Easy replacement of rubber coupling and selector for containers inside the apparatus. This unit comes with 2 containers with the right choice of nozzle diameter for polishing. Choice of any size micron-sphere sand from 25-300 can be used.

Application

Ideal application for jewellery workshop and watch industry. Cleaning after casting, mat and design finishing. Cleaning and design application. Dental laboratory cleaning, resign technique for bridges and crowns. Ideal for dental clinic for removal of any material from metal and porcelain. Useful for any metal industries for where a mat finish required. https://youtu.be/1gfNYerHDi4

Ultrasonic P-50

$0.00
The Ultrasonic P-50  is made for big volume jewellery manufacturers. Perfect for large industrial or any metal high end production, aviation, automobil, dental and medical sector. Powerful unit equiped with timer, heater, draining tap and additional accessories.

Ultrasonic P-90

$0.00
The Ultrasonic P-90  is made for even bigger volume jewellery manufacturers. Heavy duty and robust built. Increased tank capacity for larger individual pieces. Perfect for large industrial or any metal high end production, aviation, automobil, dental and medical sector. Powerful unit equiped with timer, heater, draining tap and additional accessories.

Ultrasonic P-570

$0.00
The Ultrasonic P-570  is made for big volume jewellery manufacturers. Compact size with a large capacity of water. Made for busy jewellery workshop, retailers and watch makers. Also perfect for large industrial or any metal high end production, aviation, automobil, dental and medical sector. Powerful unit equiped with timer, heater, draining tap and additional accessories.

Ultrasonic P-950

$0.00
The Ultrasonic P-950  is made for big volume jewellery manufacturers. Made for busy jewellery workshop, retailers and watch makers. Encrased tank capacity of 9.5L. Also perfect for large industrial or any metal high end production, aviation, automobil, dental and medical sector. Powerful unit equiped with timer, heater, draining tap and additional accessories.

Ultrasonic P-1600

$0.00
The Ultrasonic P-1600 is made for big volume jewellery manufacturers. Medium size heavy duty robust built with all the features of the larger units. Made for busy jewellery workshop, retailers and watch makers. Increased capacity of 16L. Also perfect for large industrial or any metal high end production, aviation, automobil, dental and medical sector. Powerful unit equiped with timer, heater, draining tap and additional accessories.

Ultrasonic type P-3

$0.00
The Ultrasonic S-3 is made for jewellery manufacturers. Our compact size in the P line. Made for  jewellery workshop, retailers and watch makers. Ideal for dental clinics, plenty of space to clean the tools. Very powerful unit for the size. Also perfect for industrial or any metal high end production, aviation, automobil, dental and medical sector. Powerful unit equiped with digital timer, heater with a digitla temperature control. Additional accessories for dental and jewellery sector.

Ultrasonic type P-5

$0.00
The Ultrasonic P-5- is made for jewellery manufacturers. Our bigger size in the P line. Made for  jewellery workshop, retailers and watch makers. Ideal for large dental clinics, perfect for cleaning full range of tools at the same time. Very powerful unit and reliable. Also perfect for industrial or any metal high end production, aviation, automobil, dental and medical sector. Powerful unit equiped with digital timer, drain tap, heater with a digitla temperature control. Additional accessories for dental and jewellery sector.

Polishing bench EC Double

$0.00
Polishing bench double. Ideal for large and busy jewellery workshop. Very efficient and low noise extractor fan. Easily replaceable filter bags. Very powerful polishing motor. Built to last reliable. Comes with exellent features of 2 extractor hood with a plexi protection.