ME-300 ‘’Eitan’’ magnetic polishing machine
The ‘’Eitan’’ magnetic polishing machine is a high performance unit. It’s extremely environmental friendly as there’s no chemical products needed! By eliminating as much chemicals as possible crucial for the environment and health and safety during handling.
The cleaning and polishing becomes very simple and safe. The procedure is not abrasive so there’s no loss of weight. Great for any regular precious and semi-precious jewellery such as gold, platinum, rhodium and combination of stones.
The unit will perform the optimal cleaning where standard equipment fails!
The high penetration of the pins will reach the spots that normally removed with chemical use.
Any sector that requires precision cleaning is a must!
Suitable for medical, dental implant production, aviation, military and any manufacturer with same criteria.
Application
Simply place all items in the container for 10-60 minutes depending on the item. Container is custom built and has a special coating to improve and maximise the result. The capacity of ME-300 is suitable for up to 200grams of different items. During operation the noise level is very low and no vibration.ME-600 ‘’Eitan’’ magnetic polishing machine
https://youtu.be/TPYhGkQOaQ4
The ‘’Eitan’’ magnetic polishing machine is a high performance unit. No chemical products needed! By eliminating as much chemicals as possible crucial for the environment.
The cleaning and polishing becomes very simple and safe. The procedure is not abrasive so there’s no loss of weight. Great for any regular precious and semi-precious jewellery such as gold, platinum, rhodium and combination of stones.
Increased container size is great for bigger items!
The unit will perform the optimal cleaning where standard equipment fails!
The high penetration of the pins will reach the spots that normally removed with chemical use.
Any sector that requires precision cleaning is a must!
Suitable for medical, dental implant production, aviation, military and any manufacturer with same criteria.
Application
Simply place all items in the container for 10-60 minutes depending on the item. Container is custom built and has a special coating to improve and maximise the result. Powerful motor allows to process even more items. The capacity of ME-600 is suitable for up to 400 grams of different items, double than the ME-300. During operation the noise level is very low and no vibration. Built in forward and backward motion is an additional added great feature.ME-1000 ‘’Eitan’’ magnetic polishing machine
The ‘’Eitan’’ magnetic polishing machine is a high performance unit. It’s extremely environmental friendly as there’s no chemical products needed! By eliminating as much chemicals as possible crucial for the environment and health and safety during handling.
The cleaning and polishing becomes very simple and safe. The procedure is not abrasive so there’s no loss of weight. Great for any regular precious and semi-precious jewellery such as gold, platinum, rhodium and combination of stones.
The largest container size in the line of ‘’Eitan’’ magnetic polishing machines!
The unit will perform the optimal cleaning where standard equipment fails in large volume!
The high penetration of the pins will reach the spots that normally removed with chemical use.
Any sector that requires precision cleaning in large volume is a must!
Product design for heavy industrial use in the medical, dental implant production, aviation, military and manufacturer sector.
Application
Simply place all items in the container for 10-60 minutes depending on the item. Container is custom built and has a special coating to improve and maximise the result. Powerful motor allows to process even more items. The capacity of ME-1000 is suitable for up to 1kg of different items, more than double then the ME-600. During operation the noise level is very low and no vibration. Built in forward and backward motion is an additional added great feature. The size of the unit still allow portability.P-2 ‘’Eitan’’ cold rhodium electroplating unit
The First small size electroplating unit made by modern glass fibre and reinforced plastic including an integrated cover.
Clean modern design and development to optimize the functionality to meet the targets.
With the increased high quality of the electroplating unit ‘’Eitan’’ made it affordable and available for all sector small or large outfits.
NO HEAT REQUIRED FOR PLATING, NO EVAPORATION, MAXIMUM USE OF RHODIUM SOLUTION!
Ideal and compact for the jewellery sector specifically targeting cold rhodium plating. Powerful and high quality platin for up to 10 pieces at the same time. Very reliable and built to last! The ‘’Eitan’’ rhodium electroplating unit comes with a 10 volt /15 ampere/48% r.r rectifier. On the display area the analogue indicating the device for voltage and current for monitoring at all times.Application
Very easy to use unit with the quickly removable bath sections. The front panel slides out to access the containers. Top of the unit sits nicely and by being able to remove it, can stay out of the way during setting. Operation is fast and smooth. Unit comes with a stainless steel anode and a hanger jig for the multiple quantity plating. No heat required for plating therefore no evaporation and maximum use guaranteed for the solution. https://youtu.be/R42gNDtMGksP-3 ‘’Eitan’’ cold rhodium electroplating unit
The First electroplating unit made by modern glass fibre and reinforced plastic including an integrated cover.
Designed to deal with large volume production and with the flexibility of colour variation.
Clean modern design and development to optimize the functionality to meet the targets.
With the increased high quality of the cold electroplating unit ‘’Eitan’’ made it affordable and available for all sector small or large outfits.
NO HEAT REQUIRED FOR PLATING, NO EVAPORATION, MAXIMUM USE OF RHODIUM SOLUTION!
Ideal for jewellery workshops for the full range of cold rhodium electro plating, more volume more options. Very reliable and built to last! The ‘’Eitan’’ cold rhodium electroplating unit comes with a 10 volt /15 ampere/48% r.r rectifier. On the display area the analogue indicating the device for voltage and current for monitoring at all times. Ultimate electroplating unit that will provide the full range of product finishes necessary.Application
Very easy to use unit with the quickly removable bath sections, 3 working bath and 3 rinse bath. The front panel slides out to access the containers same as the smaller ‘’Eitan’’ unit P-2. Top of the unit has the same removable design, can stay out of the way during setting. Operation is fast and smooth. Unit comes with a heating element, stainless steel anode, hanger jig, and titanium anode. No heat required for plating therefore no evaporation and maximum use guaranteed for the solution. Display comes with an additional timer control, thermostat and heating element control.ES-2 ‘’Eitan’’ sand blaster
The ES-2 ‘’Eitan’’ sand blaster is manufactured to the highest standard with an ergonomic and stable finish built to last! Very robust and heavy duty built.
This unit is equipped with dichroic lamp in recessed position to highlight the air syringe inside the cabinet. Provides full visibility through the tempered inspection glass at view point. The glass is covered with a special protective film to ensure durability.
‘’Eitan’’ also integrated high quality certified filters to retain bust and humidity and added selector for sand recycling.